Endoscope protection
|
Continuous leak
test
Low disinfectant concentration: 0.2%
Mild temperature: 45°C
Short contact time: 5 min
|
|
No corrosion was ever reported on endoscopes
treated in Soluscope with Soluscope D and E. Due to the continuous leak test that prevents
water penetration to the endoscope, all Soluscope users have experienced a drastic reduction on their endoscope maintenance cost.
The repair of a flooded endoscope cost
as much as a new Soluscope machine !
|
|
|
| |
Helps cutting down endoscope repairs |
|
| |
| Works with fresh low concentrated chemical solution: No reuse |
| |
Works for the endoscope with fresh solution of low concentrated chemicals, ensures the efficacy of the solution
and contributes to the absence of vapors and corrosion to the endoscope.
|
|
|
| Works at mild temperature: 45°C |
|
| |
This temperature enables to boost the chemicals efficacy, thus allows it to work at low concentration without recycling the chemicals.
This temperature is lower than the one used by most
of our competitors who work between 55°C and
60°C which is the manufacturer's specified
limit temperature for endoscopes. (Olympus 60°C,
Pentax and Fujinon 55°C). Working at 45°C
prevents any thermal shock and early aging of the endoscope
due to an elevated temperature.
|
|
| Continuous leak test: Prevents water penetration into the endoscope |
| |
As soon as the cycle starts, Soluscope tests the endoscope for leakage. After 70 sec, if no leak has been detected, the precleaning starts.
|
|
| This leak test is maintained during the whole cycle |
| |
In the case of a leak detection, Soluscope alarms, drains and maintains a positive pressure until the tank is totally drained. Furthermore Soluscope alarms
if the leak connector has not been properly connected.
In each endoscopy unit, wherever Soluscope is used, the endoscope lifetime gets longer and their repair cost decreases dramatically.
|
|
| An efficient way of connecting the endoscope |
| |
|
Ensuring
that the flow reaches all parts of all channels in spite
of their different sizes is the most important thing
when speaking of cleaning and disinfection
of endoscopes.
A well-connected endoscope with all channels flushed
at a proper pressure already does half of the job.
Soluscope has two sets of pumps ensuring the inner channel circulation:
one for the big channels (operating and suction channels) and
one for the other channels (air/water/extra channels).
|
|
See how to connect an endoscope.
Soluscope is provided with specific connecting sets according to the endoscope types and brands.
|
|
 |
