Soluscope 2
|
|
| The concept |
The advantages |
Specifically formulated |
|
Better efficacy |
Concentrated |
Better stability, less manipulation, less storage, lower cost |
Low in-use concentration |
Lower corrosion, lower toxicity better rinsing |
Mild in-use temperature |
Efficacy enhancement, shorter contact time, lower corrosion |
Single use |
No loss of active ingredient, no loss of efficacy, no cross contamination |
|
| The cleaners |
|
The disinfectants |
| Soluscope E |
|
| |
is an enzymatic cleaner used in the Soluscope 2 machine. Its neutral pH optimizes the enzyme efficacy (pH 7-7.5).
Coupled with the mechanical flow action in the machine, it allows removal, solubilization and degradation of organic debris in the channels and prepares the endoscope to the further disinfection.
Safety data sheet.
|
|
|
| Soluscope D |
|
| |
is a 24% glutaraldehyde-based disinfectant with specific surfactants and stabilizers.
The in-use conditions in the machine are 0.2%, at 45°C, during 5 minutes ;
its Minimum Effective Concentration as results from all microbiological validations is 0.15% (w/w) at 45°C for a 5 min contact time.
|
|
| Soluscope C |
|
| |
is a new acidic cleaning formulation, compatible with peracetic acid or glutaraldehyde -based disinfectants.
Its bactericidal efficacy has been demonstrated according to the European EN1040 standard. Moreover, it has been specifically developed to be efficient on bacterial biofilms, according to the protocol suggested in the European standard draft prEN ISO15883-4.
Safety data sheet.
|
|
|
| Soluscope P |
|
| |
|
is a 5% peracetic acid-based stabilized disinfectant.
The in-use conditions in the machine are 550 ppm, at 40°C, during 5 minutes; its Minimum Effective Concentration resulting from the microbiological tests is 500 ppm at 40°C for a 5 min contact time.
|
|
| |
|
|
| |
|
The additive for Soluscope P |
| |
|
| Soluscope A |
For Soluscope 3 only |
| |
is an anticorrosive product specifically formulated with stabilizers and surfactants to both protect the endoscope and machine materials from the corrosive effect of peracetic acid and to enhance its microbiological efficacy.
Both Soluscope P and Soluscope A products are automatically and extemporaneously diluted together in the machine bowl.
Safety data sheet.
|
|
|
|
